Search results

I have a ’92 Typhoon with 20" rims and stock suspension and I never hear the air pump working. The shocks in the rear feel fine when driving but I and not sure if the compressor is working. Any suggestions for testing it? If it ends up being bad, where can I get a new / used / rebuilt one...

I am looking to do a mild upgrade on my brakes. Originally going to do the disc conversation but I think it just might be easier to upgrade the drums in the rear and rotors in the front. I heard a rumor that OEM aluminum drums are no longer in production. Does anyone know of an aftermarket...

Is there anyone out there who is willing to spend a little time reviewing my DM files and let me know what they see? No major issues, just want to make sure everything is working well and this is new to me so a second set of experienced eyes would be extremely helpful. Thanks, Jason PS - If...

My truck was running fine. I cleaned the engine compartment because I am gearing up to relocate the battery and install and alky kit. Checked my DM because the truck was running a little rough and noticed a Code 32 - EGR Diagnostic Failure. Any ideas why this would be on? What / where should...

Anyone heard of an SPO Propshaft Part Number 12542269? I broke my cardan joint the other day. Is this a stock or aftermarket propshaft? Anyone know where I can get new joints as I have other projects to spend the money on vs. getting an entire new propshaft assembly. Check out the pics and...

I was driving home and all of a sudden I heard a loud continued clunk coming from the transfer case. I slowed down but so long as the truck was moving, I heard the noise and felt the truck vibrate like I had a flat. I could also feel the shifter handle move every time I heard the clunk...

I just puchased a use steel 2" cowled hood and it does not have any insulation on it. The stock insulation will fit but I was wondering if it is better to leave the insulation off to let the engine breathe better? Thanks, Jason

I install the new Vac Line kit from Adam and the truck runs much better. Hooked up datamaster and noticed that under Boost only, the Vac reads -0.3. Is this correct? I would thinks so but not sure. When not under Boost, what should it read? Thanks, Jason

A friend of mine is selling his SMC alcohol injection kit. They are commonly used on WRX's, Evo/DSMs and Grand Nationals. I can pick it up for next to nothing and wondering if anyone has used this kit before. It comes complete with Controller, tank, pump, etc. Thanks, Jason

Anyone know what other GM steering wheel will fit out Ty's? I was looking at a Pontiac Trans Am GTA (no controls) or Fiero all leater wheel circa '86-92. Someone told me they were a direct bolt on / fit? Any input? Thanks, Jason

After reviewing the datalogs I noticed that whenever there is an increase in boost, the spark retard goes up. I have the Kock Alert open as well and it increases than goes right down. I can maintain boost with no SR or KA but they both increase only at the beginning. Below are the numbers...

Please read email below. :tup: --------------------------------------------------------------------------------------------------------------- Some of you may have noticed that Datamaster downloads were pulled from the web about a month ago. They're back, with version 4.0...

I purchased the Datamaster software and cable package from Andrew www.akmcables.com and ran into some issues connecting it to my truck. The issues were NOT cable nor software related. It ended up being a conflict with other items running on my laptop that prevented the program from...

Looking to purchase a 2" cowl or custom ram air hood. Please PM with pics and price. Thanks, Jason

When I hit the gas, I can feel the turbo spool up and an increase in power but I also head a gust of air coming from behind the dash, like through the windshield defroster vents. There is definitely power loss. I have an aftermarket boost gauge but it is connected to the vacuum line the...

I was reading the forums and http://www.sytyarchives.com/ (http://www.sytyarchives.com/howto/viewarticle.php?article_name=boost_gauge.php&dir=gauges) about locating the boost gauge connection. I looked for the two vaccum lines, the one that goes to the evaporation canister and the other that...

I finally installed the DM on my laptop and have been trying to get it set up correctly. Unfortunately, I am having some issues with the connection. I tested the Com2 port and have no problem seeing the cable. I go into the Record/ Monitor window and hit the Test Com and it acknowledges the...

Can anyone tell me the original/OEM cladding color? I have seen a lot of trucks with painted cladding to match their trucks, but I want to know what the factory paint was for these parts. Looks a like they have a flat or sem-gloss sheen to them vs. the gloss paint on the main body. Any input...

When I purchased my truck it came with two broken rear corner pieces. I just purchased used ones via another member and want to know what the best way is to reinstall them? Does the lip on the inside of the cladding sit ontop of the round plastic rivits sticking out from the body? Pics would...

I tried connecting the Datamaster today and keep getting a... No PCM Sync...Waiting.....Secs message. I tested the cable and everything passed, just cannot communicate with the PCM. Any ideas? Thanks, Jason