Performance engine component pn's

[Hu Ryde]

Need more:
http://www.syty.huryde.com/html/Tech/mofo_motor_pn.html

If you know any off hand please reply.

 

[E-Rue]

this is the complete number for the stokes grind comp cam.

Comp cams part # 09-422-8
Grind number is 270AH-R14

JE pistons are 131636? might double check that number, as im not sure which ones those are.

e

 

[ed hess]

comp cams chain 3136
comp cams lifters 85012

oil pump melling M55A (per myclone)

flexplate B&M 20239

Balancer to crank bolt ARP 1342503

cam to gear bolts ARP 1341001

Oil pump driveshaft (hardened) ARP 1347901

gasket for vortec heads to lower intake felpro 1203 (per waller)



ed

 

[E-Rue]

Oliver connecting rods, part #C5700 EXLT6

per richard lee's webpage.

e

 

[Hu Ryde]

Thanks!! Awesome guys!!!!! Keep it coming!!!!!

 

[ed hess]

arp just told me for flexplate to use 200-2807 which use 5/8 socket instead of the standard no which use a 3/4 socket which wont fit on the end of the head without grinding it down.

wouldnt ya know it my vendor doesnt have it in stock AAARRRRR!

 

[Hu Ryde]

Ok, just updated and cleaned it up some. See what else I'm missing. Time to go back to school.

 

[Hu Ryde]

Who is a good source for 4-bolt mains? More updates.

 

[ed hess]

heres another number for you

When checking piston to valve clearance you must use a solid lifter.
The 412 comp cam uses hydraulic lifters no 850-12. For a solid lifter use
camp cam no 818, in a quantity of one it is no 818-1.
You only need to check intake and exhaust on no 1 cylinder least thats what comp cams told me today on the phone.

ed

 

[Falco]

Jesse,

The pushrod part numbers seem to be wrong on your part number page. You listed ~7.8" length pushrods, while the stock length is ~7.2" IMHO. Pls correct this. A Comp Cams part number is 7808-12 for the stock length for example...

Later,

 

[MikeRenz]

can you take off the [stupid] javascript for the status bar that says to donate $ and continuously scrolls text. Just put a blurb on the bottom of the pages to say what you wanna say. I hate when people use the status bar like that. [/rant]

imho you should get rid of it. take it fwiw.

 

[CLONE]

imho you should get rid of it. take it fwiw.

So that's why I get errors when I view that page, I was wondering if I was missing something important.

 

[Hu Ryde]

Sorry guys. Didn't know it created errors. Dreamweaver said it would be compatible with all browsers. Worked fine with my Nutscrape 7 & Latest IE. Anyway, it's gone. Later

 

[Falco]

Jesse,

Have you seen my comment regarding the pushrods? It's above the rambling. :roll:

Later,

 

[Hu Ryde]

Yes, thank you. I did change it. Thanks again for pointing that out bud!!

 

[CLONE]

Sorry guys. Didn't know it created errors. Dreamweaver said it would be compatible with all browsers. Worked fine with my Nutscrape 7 & Latest IE. Anyway, it's gone. Later

Thanks Jesse! Dreamweaver doesn't and can't take into account individual browser settings.

ramble ramble ramble

Thanks again!

 

[Hu Ryde]

I hear ya!!

Thanks!