Torque Converter ?

[typhoon92]

What stall and brand should I go with for my new engine build? Look at sig down below

 

[jwaller]

Re: Torque Converter ?

2800 should do just fine with that build. you will get 50 answers on the brand. I and many of the top ten trucks have the TCS that I offer in a billete cover.

 

[typhoon92]

Re: Torque Converter ?

How much do you sell these Tc for?

 

[TurboJunk]

Re: Torque Converter ?

not to steal his thread here, im going to use a pte54 in the future i was going to go with a 3400stall... that is was is recomemded on the precision website. Will that be to much? the converter im goin to use is a nitrous/blower converter from YANK, streetablilty is great from prior use in customer cars it felt fine didnt feel like a high stalling converterm until you wack it. but do you guys think it wont be a good idea

 

[jwaller]

Re: Torque Converter ?

my billete converters sell for 800 any stall speed and shipping included.

3400 does sound like overkill for a 54.

 

[George Blake]

Re: Torque Converter ?

Anything over 2800-3000 isn't gonna be very around town driving friendly. Keep that in mind when your setting your truck up.

 

[dgoodhue]

Re: Torque Converter ?

not to steal his thread here, im going to use a pte54 in the future i was going to go with a 3400stall... that is was is recomemded on the precision website.

IMO a lot of precision's TC recomendations seems to be based on putting their turbos on a Buick 3.8 (ie less displacement)

 

[TurboJunk]

Re: Torque Converter ?

So what would you guys recommend 3000 stall?

 

[SY756]

Re: Torque Converter ?

So what would you guys recommend 3000 stall?

That's what I had in my Sy with a PTE52. It spooled good and was pretty streetable. But, I'm with everyone else about going any higher.

 

[typhoon92]

Re: Torque Converter ?

Thanks guys for all your input on which TC to use..