Ok need help, Please

[kessler]

So i spent a better part of the night tearing out the Engine/tranny out o the TY for a winter build. And when i got the tranny out this thing has been painted 3 diff colors and i dont think this is the right tranny for this truck, As in i think that it might be out of a regular Blazer, How can i tell i cant find any #s on it to run and then i got to the stall converter, and its nice and looks brand new but when i drove it compared to a friend of mines SY it just feels completely diff.

Also im not sure and i could be completely wrong, but how many bolts are suposed to hold the flex plate to the Converter, Cuz this one had 3 and i thought it was suposed to have 4. Like i said im not sure but i thought id ask to be sure.


And now for the Help Who can build a decent tranny for me, i dont need a big build up but somthing that will be strong for an ocasional race. This tranny has a warenty on it from the previous owner but after looking at the shape of this thing ive got a really bad feeling........

 

[nightdiver]

Re: Ok need help, Please

Three bolts makes you wonder if they are enough for the job , right ?

Id say sent your tranny to Waller to make it syty specific and forget about it.

 

[myclone]

Re: Ok need help, Please

So i spent a better part of the night tearing out the Engine/tranny out o the TY for a winter build. And when i got the tranny out this thing has been painted 3 diff colors and i dont think this is the right tranny for this truck, As in i think that it might be out of a regular Blazer, How can i tell i cant find any #s on it to run and then i got to the stall converter, and its nice and looks brand new but when i drove it compared to a friend of mines SY it just feels completely diff.

Color really doesnt matter much... There is a series of numbers and letters on the passenger side of the trans on a pad thats just above the pan rail. Post those numbers/letters on here.

Also im not sure and i could be completely wrong, but how many bolts are suposed to hold the flex plate to the Converter, Cuz this one had 3 and i thought it was suposed to have 4. Like i said im not sure but i thought id ask to be sure.

Three bolts in the TC to flex plate and thats plenty since the flex plate will break before you shear those bolts off (unless you put the wrong bolts back in there).

 

[kessler]

Re: Ok need help, Please

Ok well ill swing by he shop and get the #s, it was a late night and i just have a funny feeling about this tranny now, Also how do i get intouch with this Waller Person, And whats the Typical cost on rebuilding it???? Anyone Know

 

[kessler]

Re: Ok need help, Please

Why is it that ive asked this Question a couple of times before and no one can help me, Who is the Guy Waller that does trannys

 

[spooldup]

Re: Ok need help, Please

his screen name on the bb is jwaller. What are the number above the pan? That will let us know what you have.

 

[kessler]

Re: Ok need help, Please

I wasent able to get down to the shop today i had to much running around, so ill get them tomorrow when im at work

 

[nightdiver]

Re: Ok need help, Please

And whats the Typical cost on rebuilding it????

It depens on what you want to add. Blue cluthes are expensive but its the way to go.
There are different levels you can choose from. Is your engine stock ? and will it stay that way ? :2cents:

 

[kessler]

Re: Ok need help, Please

his screen name on the bb is jwaller. What are the number above the pan? That will let us know what you have.

What is the BB? And the Motor is getting built as we speek, so far the maods are as follows

Vortech Heads with 2.02/1.60 erson Swirl Valves
SRP Pistons Eagle Rods
Comp 1.6 rockers/Comp Springs
3k Stall
50 LB Injectors with a Precision Turbo
Tranny Cooler
And im not sure what Cam to get yet.

Its going to be mostly a weekend s

treet truck with a visit to the races every once in awhile.

 

[SeattleSy#1255]

Re: Ok need help, Please

BB is bulletin board (spelling?) ...........so look under the search for his screen name and private message him...screen name again is jwaller.

 

[midnightbluS10]

Re: Ok need help, Please

http://www.syty.net/forums/member.php?find=lastposter&t=30254

 

[kessler]

Re: Ok need help, Please

Ok well here are the #'s off the tranny

06YC M4 857842 and the last # i wasent to sure about but i think its 020 So anyone know if this is the correct tranny????????

 

[jwaller]

Re: Ok need help, Please

no it's not correct. as dave said before it should have a 1lhm(syclone) 2lhm(92 TY) or 3lhm(93 ty) begining the code sequence on the RR corner of the pan rail area. it should have also had a large decal on the back of the bellhousing but many of them have fallen off.

 

[kessler]

Re: Ok need help, Please

The Larger decal on the back of the Bell Housing is not realy there, As in its worn away, Well looks like ill be getting a corect tranny then and not this pos.

 

[CKEITH]

Re: Ok need help, Please

If You Care Anything About Getting A Quality Rebuild... Send It To Jwaller...hes Re Doing My Atr Vortecs As We Speak.if I Had Not Bought Them Off Ebay Brand New For 500.00 I Would Have Been Pi$$ed With The Quality.nuff Said Waller Will Fixem.

 

[kessler]

Re: Ok need help, Please

Yeah im just trying to save up for that now, $1800 is a bit much for me right now. But i have all winter so ill get it done.