Is there a Heavy Duty Front Axle Replacement/ wheel bearings at the same time? ---

[alwayscode390]

I am about to put in new front axles.

Are the stock replacement ones good enough or do you recommend a "heavy duty" replacement?

Should I do the wheel bearings at the same time (I already have them) ... do the old bearing hubs come off during the axle installation?

Thanks ---

 

[sy#2716]

Re: Is there a Heavy Duty Front Axle Replacement/ wheel bearings at the same time? --

Stock is fine. Pleanty of people make big HP with half shafts and wheel bearings. Also wheel bearing are a sealed unit grab the wheel at 12 and 6 and wiggle back and forth and see if there is any play if so they are bad if not your fine.

 

[warmpancakes]

Re: Is there a Heavy Duty Front Axle Replacement/ wheel bearings at the same time? --

if you have dumped your abs you can get non abs hubs they are a little cheaper, but if you have the cbr front brakes you have to make the spacer thinner

 

[alwayscode390]

Re: Is there a Heavy Duty Front Axle Replacement/ wheel bearings at the same time? --

The spacer has to be thinner if I use the NON ABS wheel bearing hubs?

Thanks ---