Trans fluid flow

[sy2675]

I want to be 100% sure befroe i hook up my lines,

the line going into the bottom of the radiator is the pressure line FROM the tranny, and the top line is the RETURN line?

Should i plumb teh aux cooler the same way, HOT into the bottom and return out of the top?

Thanks,

Rich

 

[Jimmy]

Re: Trans fluid flow

It pumps OUT of the BOTTOM line of the trans and the TOP is the RETURN.

So:
LOWER fitting on trans to remote filter "IN"
Remote filter "OUT" to bottom of stock cooler
Top of stock cooler to bottom of aftermarket cooler
Top of aftermarket cooler to UPPER trans fitting

:tup:

 

[hatrik8]

Re: Trans fluid flow

Old post dig up: I thought I would share this drawing I did (nothing fancy just ms paint) so I can visualize the setup I will be doing for braided lines.

This is how I have it plumbed now with a remote filter. I like the filter after the trans because it keeps the radiator and cooler from being contaminated and also provides the highest trans temps.