Recent content by CC801

Re: Lean burn? why solder the brown wire together when it needs to be disconnected to set base timing?

Re: 11 sec truck needs cam/converter change? You have an issue with your brakes. I have ls fbody rear discs, and was able to hold 17lb on the foot brake. Vortecs, 412, pte 52, a2a, 60's , 3in exhaust. 2800 stall.

Like the title says looking to buy a 4l80e propshaft

Re: ls swap here i come Stock tank isn't a problem, I'd always go size bigger than you think you'll need on line, especially if your gonna run e85. 120's are common, make it easy on yourself now and change to an aftermarket rail kit. They can be bought for 120 or less for holley rails. Join...

Used 3/8 deep metric chrome socket set with magnetic tray 212sfsmy-120.00 shipped Nib snap on bolt grip set (steering wheel and harmonic balancer puller) cj2001p - 150.00 shipped Lock plate depressor (for steering columns) 100.00 shipped Diesel compression tester in case with 5 adapters all...

Re: 93 Ty #1036 Tampa Bay, FL Got rebalanced, and re-ran but ended up having another vibration problem and ate the mains. It ended up getting trashed.

Re: 93 Ty #1036 Tampa Bay, FL Dave that vibration ended up being an out of balance crankshaft. That bottom end had a gmpp raw forging, forged crank with oversized rod ends. the rods were were out of something other than a 4.3, they were eagle h beams, but had been machined to fit the crank...

Re: help with the quest for 11's If your stock crank is usable, turn it and reuse it.

Re: WTB ATA intercooler Randy I have one, it's a tight fit, but it fits. I'll get you pics when I get home

Re: Lt-1 tb You still have to change the linkage on the throttle body if you are running a 700r4. because even though you can attach the TV cable to the lt1 throttle body, the adjustment won't be right.

Re: turbo upgrade It will, but will require a different down pipe. Will be laggy with stock torque converter, cam, heads.

Re: Borg Warner s366 setup for sale It sold a while back

Re: Front coilover setup with a-arms Were the PEP arms the one that had failures?

Re: Any Consensus On Sealing Intake 2 Vortec Heads GM used a grey rtv called assembly adhesive i believe, on the lt1's because they had common leaks at the china wall. They would also have you dimple the wall with a punch, to give the adhesive something the grab onto. I remember having to pull...

3/8 drive shallow 6 point chrome sockets 8 - 19mm. All but the 12mm are new never used. 110.00 shipped. 3/8 drive shallow 6 point impact swivel sockets 3-8 - 3/4 7 pieces, only 5/8 has been used - 150.00 shipped 3/8 drive swivel head ratchet model f747a - 65.00 shipped pics avialable via email...